The thickness of RTP ELITE pipe wall and connection fittings is 50% greater as compared to conventional polypropylene plumbing systems. ELITE pipes and fittings are made of special heavily filled noise-absorbing material based on polypropylene, which density is 1.5 times higher than the density of pure polypropylene. This enables RTP ELITE pipes and fittings to efficiently absorb noise occurring in the plumbing system.
Pipes and fittings have high ring stiffness and high temperature resistance (short-term exposure of up to 100 °С).
The colour of RTP ELITE pipes and connection fittings is white.
Dual-leaf seal of soft styrene butadiene rubber (SBR 40±5 IRDH) with plastic (PP-H polypropylene) spacer ring. Developed for PP plastic pipes and fittings as per EN 1451-1 and EN 14-1-1 codes, and meets the requirements of EN 681-1 WC/WCL and DIN 4060.
Material: Polypropylene with mineral additives (PP-М).
General Material Specifications:
- Density, g/cm3
- Linear expansion coefficient
- Melting point
- Thermal conductivity
Polypropylene pipes and fittings shall not be used:
- if the operating temperature of transferred liquid is higher than 95 °C;
- in rooms of fire hazard rating A, B, and C;
- in rooms with thermal radiation sources, which surface temperature is higher than 130 °C;
The warranted life is 10 years.