RTP axial angle piece

RTP Double-side brass fitting designed for connection of PE-Xa pipes at 90° angle. Angle pieces can be used both for exposed and concealed installation of pipelines. These fittings are solid-piece fittings, therefore they can be embedded in concrete structures. Angle pieces do not reduce the diameter of connected piping on the nipple side, as the pipe ends are flared before making up the connection. The tightness of connection is achieved by pressing the pipe material into the grooves of the nipple that occurs when the sleeve is slipped on the nipple.

They are used in potable and domestic water supply systems, hot water, heating, compressed air systems, and also on process piping transferring liquids and gases that are not corrosive to the pipe material.

Brass angle piece of RTP Company are made of СW 617N hot-pressed brass to EN 12165 standard (corresponding to grade LS59-1 as per GOST 15527).  Operating pressure: 1.6 mPa, maximum ambient temperature: 95 °C. Pipe threaded connection meets GOST 6357-81. Piping should be installed as per the instructions set out in SP 40-102-2000, SP 344.1325800.2017, and SP 73.13330.2016 codes. For Installation Manual please see RTP channel in YouTube, or follow the link below to our website